M1-10
The m1 series by MacGregor Welding Systems is a compact, lightweight power supply range aimed at bringing superior technology at affordable prices. The units offer closed loop control with embedded monitoring and are an ideal option for a wide range of applications. The series consists of two models, the m1-10, offering linear technology, especially designed for precision low current applications and the m1-40 which is designed for higher current applications.
Typical Applications
- Gold ribbon welding
- Micro circuit welding
- Solar cell assembly
- Sensor and component welding
- Detonator and bridge wire welding
Unit Features
- Ideal for precision, low current welding applications
- Lowest cost unit available offering industry leading performance
- Ideal replacement for existing systems such as the MCW-550 and Unibond ®
Key Features
- Intuitive graphical user interface incorporating advanced waveform weld monitoring
- Closed loop control of current, voltage and power provides exceptional control of output
- Simple programming
- Single phase power, 95–260 VAC
- Single and dual pulse modes including part conditioning function
- 15 stored programmes
- Weld logging capability
- Compact, lightweight design
Intuitive User Interface
The advanced m1 user interface allows the user to view the welding profile in real time while remaining simple to navigate through the comprehensive menu structure.
Standard Features
| Maximum Output Current (A) | 1000 Amps DC |
| Maximum Output Voltage at Full Load | 5 V DC at maximum current |
| Maximum Output Power | 5 KW |
| Duty Cycle at: | |
| 4000 Amps | – |
| 3000 Amps | – |
| 2000 Amps | – |
| 1000 Amps | 10ms / second |
| 500 Amps | 50ms / second |
| Control Modes | Current, voltage and power |
| Output Accuracy | ±1% of set value or ± 1 Amp |
Programmed Values
| Squeeze Time | 0.1–999 ms |
| Upslope Time Pulse 1 | 0.1–999 ms |
| Peak Time Pulse 1 | 0.1–999 ms |
| Downslope Time Pulse 1 | 0.1–999 ms |
| Delay Time Between Pulses | 0.1–999 ms |
| Upslope Time Pulse 2 | 0.1–999 ms |
| Peak Time Pulse 2 | 0.1–999 ms |
| Downslope Time Pulse 2 | 0.1–999 ms |
| Process Monitor Limits | Voltage and Current |
Input Requirements
| Input Voltage | 95 – 260 VAC |
| Mains Phase | Single phase |
| Control I/O | Opto-isolated |
| Serial Communications | Options: RS232, RS422/485, CAN |
Dimensions
| Width (mm) | 170 mm |
| Height (mm) | 275 mm |
| Depth (mm) | 470 mm |
| Weight (Kg) | 16.5 Kg |